Dual Hot Water Generator

In a world that thrives on innovation and progress, we are thrilled to introduce our latest creation ‘DUAL FUEL HOT WATER GENERATOR’. After months of dedicated research, design, and development, we are proud to unveil a groundbreaking solution that is set to redefine the HVAC industry.

Share:

Make Rapid Cool (Rapid Therm)
Type Horizontal (Skid Mounted)
Model No. Rapid Therm – RT-20 / E-250
Capacity 2 Lac / 250 KW
Water Temp. (In) 50°C
Water Temp. (Out) 55°C
Water Flow Rate 12500 LPH
Type of Fuel Used Oil / Electric
Fuel Consumption 20.5 Kg/h / 250 Unit/h
Flue Gas Outlet 200 mm (ID) – Flange Type
Working Pressure 10 Kg/Cm²
Unit Efficiency 93% / 98%
Material (Oil/Electric) Carbon Steel (BS 3059) / Mild Steel
Vessel Code Constructed as per ASME Standard
Vessel Sheet Thickness 06mm Shell & 08mm Dish Ends
Front & Back Door Openable, Lined with High Grade Insulation and Refractory
Electrical Load 415 Volt AC, 50 Hz, 3 Phase 4 Wire (2.5 kW / 250 kW)
Water Inlet & Outlet 100 mm dia, Flange End
Electrical Control Panel Made from 18 Gauge CRC Sheet, Powder Coated Enamel Finish,
Main Incomer, RYB Indicating Lights,
Volt/Amp Meter (Digital), Hour Meter,
Contactor, Control Module Card with Relays,
Overload Relay, Single Phase Preventer,
Fault Indications (Pressure, Temperature, Water & Flue),
Burner Trip with Audio Alarm
Burner (Monoblock) Ecoflame / Riello / Unigas
Heater Rating 25 KW × 2 Nos = 50 KW × 5 Steps = 250 KW
Type of Heaters Electrical Resistance, Water Immersion
Heater Material Copper Tube, duly chrome plated
Safety Devices Pressure Relief Valve,
In/Out Pressure Gauge with Ball Valve,
Inlet & Outlet Temperature Controller,
Pressure Switch,
Water & Flue High Temp Cut-Out,
Low Level Cut-Out
Test Pressure 250 P.S.I.G
Insulation Material 50mm Thick Fiber Glass Wool (32 Kg Density)
Cladding 22 Gauge G.I Sheet, Epoxy Coated (Red & Black)

Description

It is not just another product; it’s a game-changer, meticulously crafted to meet the evolving needs of our HVAC industry and for extreme weather conditions.

There are two basic options, the first is installing a split systems. which is hectic and the second option is to install a Dual Fuel Hot water generator.

BENEFIT:-
Fuel Option Electric / Oil / Gas
Sleek design: Uses Less space
Reduce Installation cost
Can switch to both fuel whenever demand increases
Suitable for extreme weather condition
Uses as a backup if one system fails

CAPACITY RANGE:-
50000 Kcal
1 Lakh Kcal
2 Lakh Kcal
4 Lakh Kcal
6 Lakh Kcal

BACKUP HEATING :-
One of the primary functions of a dual heat system is to provide a backup heat source. If one heat source fails or is insufficient, the system can switch to the alternative source to ensure continuous heating.

QUICK HEATING RESPONSE :-
Dual heat systems can provide quicker heating response times compared to single-source heating systems. This is because the backup heat source can provide rapid heating when needed, such as during extreme cold spells.

ENVIRONMENTALLY FRIENDLY:-
When designed and configured properly, dual heat systems can be more environment friendly than traditional heating systems. For example, using a electric heater based hot water generator, the carbon emissions are reduced as compared to relying solely on Diesel / LPG fuels for heating.

IMPROVED COMFORT:-
Dual heat systems can offer improved comfort by maintaining a more consistent indoor temperature, thereby reducing temperature fluctuations, and ensuring that the Building / Home stays warm even during very cold weather. It’s important to note that the specific features and benefits of a dual heat system can vary depending on the type of system, the combination of heat sources used, and the brand or model. When considering a dual heat system for your building / home, it’s advisable to consult with a qualified HVAC (heating, ventilation, and air conditioning) professional to assess your specific needs and design a system that suits your requirements.

Additional information

APPLICATION

Centralized Heating

MAKE

Rapid Cool (Rapid Therm)

CAPACITY

2 Lac / 250KW

TYPE

Horizontal (Skid Mounted)

MODEL

Rapid Therm – RT-20 / E-250

Type of Fuel Used

Oil / Electric

WATER FLOW RATE

12500 LPH

WATER TEMPERATURE “IN”

50 Deg C

WATER TEMPERATURE “OUT”

55 Deg C

WORKING PRESSURE

10 Kg/Cm2

Fuel Consumption Oil/Electric

20.5 Kg/h / 250 Unit/h

Flue Gas Outlet

200mm (Id) –Flange Type

Unit Efficiency Oil/Electric

93% / 98%

Material Oil/Electric

Carbon Steel (BS 3059) / Mild Steel

VESEEL CODE

Constructed as Per ASME Standard

VESSEL SHEET THICKNESS

06mm Shell & 08mm Dish Ends

Front and Back Door

Openable, Lined with High Grade Insulation and Refractory

Electrical Connected Load Oil/Electric

415 Volt Ac, 50 Hz, 3phase 4 Wire, (2.5 kw / 250 kw)

Water Inlet & Outlet Size

100 mm dia. Flange End

Electrical Control Panel

Made From 18 Gauge CRC Sheet, Finished with Backed
Enamel, Pre Wired with Main Incomer, RYB Indicating Lights,
Volt/Amp Meter (Digital), Hour-Meter, Contactor, Control Module
Card with Relays, Overload Relay, Single Phase Preventer, With
Fault Indicating Lights Such as High Pressure, High Temperature
of Water and Flue, Burner Trip with Audio Alarm Low Level.

Burner (Monoblock) High Efficient, Low Noise

Ecoflame / Riello / Unigas

Heater Rating

25 KW x 2 Nos = 50 KW x 5 Steps = 250 KW

Type of Heaters

Electrical Resistance, Water Immersion Type,

Materials Of Heaters

Copper Tube, Duly Chrome Plated.

Safety Devices

Pressure Relief Valve, In/Out Pressure Gauge with Ball Valve,
Inlet and Outlet Temperature Controller, Pressure Switch,
Water and Flue High Temperature Cut Out, Low Level Cut Out

Test Pressure

250 P.S.I.G

Insulation Material

50mm Thick Fiber Glass Wool (32 Kg Density)

Cladding

22 Gauges G.I Sheet Duly Epoxy Coated (Red & Black Colors)

Make Rapid Cool (Rapid Therm)
Type Horizontal (Skid Mounted)
Model No. Rapid Therm – RT-20 / E-250
Capacity 2 Lac / 250 KW
Water Temp. (In) 50°C
Water Temp. (Out) 55°C
Water Flow Rate 12500 LPH
Type of Fuel Used Oil / Electric
Fuel Consumption 20.5 Kg/h / 250 Unit/h
Flue Gas Outlet 200 mm (ID) – Flange Type
Working Pressure 10 Kg/Cm²
Unit Efficiency 93% / 98%
Material (Oil/Electric) Carbon Steel (BS 3059) / Mild Steel
Vessel Code Constructed as per ASME Standard
Vessel Sheet Thickness 06mm Shell & 08mm Dish Ends
Front & Back Door Openable, Lined with High Grade Insulation and Refractory
Electrical Load 415 Volt AC, 50 Hz, 3 Phase 4 Wire (2.5 kW / 250 kW)
Water Inlet & Outlet 100 mm dia, Flange End
Electrical Control Panel Made from 18 Gauge CRC Sheet, Powder Coated Enamel Finish,
Main Incomer, RYB Indicating Lights,
Volt/Amp Meter (Digital), Hour Meter,
Contactor, Control Module Card with Relays,
Overload Relay, Single Phase Preventer,
Fault Indications (Pressure, Temperature, Water & Flue),
Burner Trip with Audio Alarm
Burner (Monoblock) Ecoflame / Riello / Unigas
Heater Rating 25 KW × 2 Nos = 50 KW × 5 Steps = 250 KW
Type of Heaters Electrical Resistance, Water Immersion
Heater Material Copper Tube, duly chrome plated
Safety Devices Pressure Relief Valve,
In/Out Pressure Gauge with Ball Valve,
Inlet & Outlet Temperature Controller,
Pressure Switch,
Water & Flue High Temp Cut-Out,
Low Level Cut-Out
Test Pressure 250 P.S.I.G
Insulation Material 50mm Thick Fiber Glass Wool (32 Kg Density)
Cladding 22 Gauge G.I Sheet, Epoxy Coated (Red & Black)

Quick Contact

Fill out the form below, and we will be in touch shortly.